Venus Fly Trap Vickie “Prop Headpiece”

Creating a headpiece for your Venus Fly Trap Vickie costume out of cardboard is a fun and creative project! Here’s a step-by-step guide to help you make the headpiece:

Materials Needed

• Cardboard (a sturdy box or sheets)
• Green fabric or green paint
• Red or pink fabric or paint
• Scissors
• Hot glue gun or strong adhesive
• Headband (preferably a wide one for stability)
• Pencil
• Ruler
• Optional: Craft knife for more precise cuts

Instructions

Step 1: Design the Headpiece

1. Sketch the Shape: Draw a design of the Venus fly trap jaws on paper. The jaws should be broad and open, resembling the trap. If you’d like inspiration, look at my Venus flytrap Vickie costume designs here.
2. Measure for Size: Ensure the size fits your head comfortably. The jaws should be large enough to be noticeable but not so large that they become unwieldy.

Step 2: Cut the Cardboard

1. Transfer the Design: Using a pencil, trace your design onto the cardboard. You will need two identical pieces for the jaws.
2. Cut Out the Shapes: Carefully cut the shapes using scissors or a craft knife. With a craft knife, you should work on a cutting mat or a safe surface.

Step 3: Create the Inner Trap

1. Cut Inner Shapes: Cut smaller shapes from the cardboard to represent the inner part of the trap. These should be slightly smaller than the outer jaws.
2. Paint or Cover: Paint the outer jaws green and the inner parts red or pink. If you’re using fabric, cut it to size and glue it onto the cardboard.

Step 4: Assemble the Headpiece

1. Attach the Inner Parts: Use hot glue to attach the inner trap pieces to the outer jaws. Could you make sure they are securely fastened?
2. Create a Base: If the headpiece is too flimsy, consider adding a cardboard base that connects the two jaws at the bottom. This will help them stand upright.

Step 5: Attach to Headband

1. Prepare the Headband: Take it and ensure it’s clean and sturdy.
2. Glue the Jaws: Position the jaws on the headband and use hot glue to attach them securely. Hold them in place until the glue sets.

Step 6: Add Petals

1. Cut Petals: From the remaining cardboard, cut out leaf shapes to represent the plant’s leaves.
2. Paint or Cover: Paint these green and attach them around the base of the headpiece using glue.

Step 7: Final Touches

1. Check Stability: Ensure the headpiece is stable and comfortable. Please adjust the position if you need to.
2. Decorate: Add faux leaves or flowers to enhance the look.

Tips

• Comfort: Make sure the headpiece is not too heavy and fits securely on your head.
• Practice Wearing It: Before the event, wear the headpiece to ensure it stays in place and is comfortable.
• Coordinate with Makeup: Plan your makeup to complement the headpiece, using greens and reds to tie the whole look together.
• InfoStarBase Tip: Click here to view my Venus Fly Trap Vickie costume and create your captivating look.

With these steps, you should be able to create a fantastic Venus Fly Trap headpiece that will be a standout feature of your costume! Enjoy the crafting process!